svcadm(1M) System Administration Commands svcadm(1M)NAMEsvcadm - manipulate service instances
SYNOPSIS
/usr/sbin/svcadm [-v] enable [-rst] {FMRI | pattern}...
/usr/sbin/svcadm [-v] disable [-st] {FMRI | pattern}...
/usr/sbin/svcadm [-v] restart {FMRI | pattern}...
/usr/sbin/svcadm [-v] refresh {FMRI | pattern}...
/usr/sbin/svcadm [-v] clear {FMRI | pattern}...
/usr/sbin/svcadm [-v] mark [-It] instance_state
{FMRI | pattern}...
/usr/sbin/svcadm [-v] milestone [-d] milestone_FMRI
DESCRIPTIONsvcadm issues requests for actions on services executing within the
service management facility (see smf(5)). Actions for a service are
carried out by its assigned service restarter agent. The default ser‐
vice restarter is svc.startd (see svc.startd(1M)).
OPTIONS
The following options are supported:
-v Print actions verbosely to standard output.
SUBCOMMANDS
Common Operations
The subcommands listed below are used during the typical administration
of a service instance.
For subcommands taking one or more operands, if the operand specifies a
service (instead of a service instance), and that service has only a
single instance, svcadm operates on that instance. If an abbreviated
FMRI (a fault management resource identifier) or pattern matches more
than one service, a warning message is displayed and that operand is
ignored. See smf(5).
In the case that the service has more than one instance, svcadm return
a non-zero exit status.
enable [-rst] {FMRI | pattern}. . .
Enables the service instances specified by the operands. For each
service instance, the assigned restarter will try to bring it to
the online state. This action requires permission to modify the
"general" property group of the service instance (see smf_secu‐
rity(5)).
If the -r option is specified, svcadm enables each service instance
and recursively enables its dependencies.
If the -s option is specified, svcadm enables each service instance
and then waits for each service instance to enter the online or
degraded state. svcadm will return early if it determines that the
service cannot reach these states without administrator interven‐
tion.
If the -t option is specified, svcadm temporarily enables each ser‐
vice instance. Temporary enable only lasts until reboot. This
action requires permission to modify the "restarter_actions" prop‐
erty group of the service instance (see smf_security(5)). By
default, enable is persistent across reboot.
disable [-st] {FMRI | pattern}. . .
Disables the service instance specified by the operands. For each
service instance, the assigned restarter will try to bring it to
the disabled state. This action requires permission to modify the
"general" property group of the service instance (see smf_secu‐
rity(5)).
If the -s option is specified, svcadm disables each service
instance and then waits for each service instance to enter the dis‐
abled state. svcadm will return early if it determines that the
service cannot reach this state without administrator intervention.
If the -t option is specified, svcadm temporarily disables each
service instance. Temporary disable only lasts until reboot. This
action requires permission to modify the "restarter_actions" prop‐
erty group of the service instance (see smf_security(5)). By
default, disable is persistent across reboot.
restart {FMRI | pattern}. . .
Requests that the service instances specified by the operands be
restarted. This action requires permission to modify the
"restarter_actions" property group of the service instance (see
smf_security(5)).
This subcommand can restart only those services that are in the
online or degraded states, as those states are defined in smf(5).
refresh {FMRI | pattern}. . .
For each service instance specified by the operands, requests that
the assigned restarter update the service's running configuration
snapshot with the values from the current configuration. Some of
these values take effect immediately (for example, dependency
changes). Other values do not take effect until the next service
restart. See the restarter and service documentation for more
information.
If the service is managed by svc.startd(1M), the refresh method
will be invoked if it exists to request the service reread its own
configuration. For other restarters, see the restarter documenta‐
tion.
This action requires permission to modify the "restarter_actions"
property group of the service instance (see smf_security(5)).
clear {FMRI | pattern}. . .
For each service instance specified by the operands, if the
instance is in the maintenance state, signal to the assigned
restarter that the service has been repaired. If the instance is in
the degraded state, request that the assigned restarter take the
service to the online state. This action requires permission to
modify the "restarter_actions" property group of the service
instance (see smf_security(5)).
Exceptional Operations
The following subcommands are used for service development and tempo‐
rary administrative manipulation.
mark [-It] instance_state {FMRI | pattern}. . .
If instance_state is "maintenance", then for each service specified
by the operands, svcadm requests that the assigned restarter place
the service in the maintenance state. See svc.startd(1M) and
inetd(1M) for a detailed description of the actions taken for each
restarter.
If instance_state is "degraded", then for services specified by the
operands in the online state, svcadm requests that the restarters
assigned to the services move them into the degraded state.
If the -I option is specified, the request is flagged as immediate.
The -t option is only valid for maintenance requests. When this
option is specified, the request is flagged as temporary, and its
effect will only last until the next reboot.
milestone [-d] milestone_FMRI
If milestone_FMRI is the keyword "none", all services other than
the master restarter, svc:/system/svc/restarter:default, will be
temporarily disabled.
If milestone_FMRI is the keyword "all", temporary enable and dis‐
able requests for all services will be nullified.
If milestone_FMRI is one of the following:
svc:/milestone/single-user:default
svc:/milestone/multi-user:default
svc:/milestone/multi-user-server:default
then temporary enable and disable requests for the indicated ser‐
vice and all services it depends on (directly or indirectly) will
be nullified. All other services will be temporarily disabled.
Changing the system's current milestone with the "milestone" sub‐
command will not change the current run level of the system. To
change the system's run level, invoke /sbin/init directly.
This action requires permission to modify the "options_ovr" prop‐
erty group of the svc:/system/svc/restarter:default service
instance (see smf_security(5)).
The -d option immediately changes the milestone to the requested
milestone, as above. Additionally, it makes the specified milestone
the default boot milestone, which persists across reboot. The
default milestone is defined by the options/milestone property on
the master restarter, svc:/system/svc/restarter:default. If this
property is absent, "all" is the default. This action requires per‐
mission to modify the "options" property group of the svc:/sys‐
tem/svc/restarter:default service instance (see smf_security(5)).
Operands
The following operands are supported:
FMRI An FMRI that specifies one or more instances. FMRIs can be
abbreviated by specifying the instance name, or the trailing
portion of the service name. For example, given the FMRI:
svc:/network/smtp:sendmail
All the following are valid abbreviations:
sendmail
:sendmail
smtp
smtp:sendmail
network/smtp
While the following are invalid:
mail
network
network/smt
If the FMRI specifies a service, then the command applies to
all instances of that service. Abbreviated forms of FMRIs
are unstable, and should not be used in scripts or other
permanent tools.
pattern A pattern that is matched against the FMRIs of service
instances according to the "globbing" rules described by
fnmatch(5). If the pattern does not begin with "svc:", then
"svc:/" is prepended.
If an abbreviated FMRI or pattern matches more than one service, a
warning message is displayed and that operand is ignored.
EXAMPLES
Example 1 Restarting a Service Instance
The following command restarts the NFS server. The full FMRI for the
default service instance is: svc:/network/nfs/server:default
However, you can abbreviate the full FMRI as follows:
# svcadm restart nfs/server
Example 2 Disabling the Standard HTTP Server
The following command disables the standard HTTP server, using an
abbreviated FMRI:
$ svcadm disable http
Example 3 Enabling an Instance and Its Dependent Instances
The following command enables the foo:bar instance, and all instances
on which it depends:
$ svcadm enable -r foo:bar
Example 4 Synchronously enabling an instance
The following command enables the foo:bar instance. The command will
not return until the instance comes online or svcadm determines it is
not possible for the service to come online.
$ svcadm enable -s foo:bar
Example 5 Restricting and Restoring the Running Services
The following command restricts the running services to single user
mode:
# svcadm milestone milestone/single-user
The following command restores the running services:
# svcadm milestone all
EXIT STATUS
The following exit values are returned:
0 Successful completion.
1 A fatal error occurred. One or more error messages are displayed
on standard error.
2 Invalid command line options were specified.
3 svcadm determined that a service instance that it was waiting for
could not reach the desired state without administrator interven‐
tion due to a problem with the service instance itself.
4 svcadm determined that a service instance that it was waiting for
could not reach the desired state without administrator interven‐
tion due to a problem with the service's dependencies.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
┌─────────────────────────────┬─────────────────────────────┐
│ ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├─────────────────────────────┼─────────────────────────────┤
│Availability │SUNWcsu │
├─────────────────────────────┼─────────────────────────────┤
│Interface Stability │See below. │
└─────────────────────────────┴─────────────────────────────┘
The interactive output is Uncommitted. The invocation and non-interac‐
tive output are Committed.
SEE ALSOsvcprop(1), svcs(1), inetd(1M), init(1M), svccfg(1M), svc.startd(1M),
libscf(3LIB), contract(4), attributes(5), smf(5), smf_security(5)NOTES
The amount of time svcadm will spend waiting for services and their
dependencies to change state is implicitly limited by their method
timeouts. For example, a service using the default restarter whose
start method hangs will be transitioned to the maintenance state when
its timeout expires. svcadm will then consider it impossible for this
service to come online without administrator intervention.
Attempts to synchronously enable a service which depends (directly or
indirectly) on a file may fail with an exit status indicating that
dependencies are unsatisfied if the caller does not have the privileges
necessary to search the directory containing the file. This limitation
may be removed in a future Solaris release.
SunOS 5.10 9 May 2008 svcadm(1M)