makefiles(4L) GMD FOKUS FILE FORMATS makefiles(4L)NAMEmakefiles - users guide for compiling projects on different platforms
SYNOPSIS
make [target]
gmake [target]
smake [target]
Target may be one of:
.help to get a list of possible targets and a short description.
all to make the default targets
install to make and install the default targets (see INS_BASE and
INS_KBASE to learn how to modify the installation path).
ibins to make and install a target in SRCROOT/bins
depend to re-make dependency rules for all default targets. Note:
All dependency files will automatically remade on the next
run of make before they are included.
clean to remove core files and all intermediate object files.
clobber to remove the targets from clean, all dependency files and
all final targets
distclean to remove the targets from clean and clobber and all made
files for all architectures.
tags to make vi(1) compatible tags
TAGS to make emacs(1) compatible tags
config reserved for future use.
rmtarget to remove the default target
relink to remove the default target and remake it immediately. This
can be used to change .e.g LD_RUN_PATH in the executable.
DESCRIPTION
Makefiles is a set of rules that allows compiling of structured
projects with small and uniformly structured makefiles. All rules are
located in a central directory. Compiling the projects on different
platforms can be done simultaneously without the need to modify any of
the makefiles that are located in the projects directories.
Makefiles is a set of high level portability tools superior to autoconf
and easier to use.
Three make programs are supported: Sunpro make, GNU make and smake.
BSDmake could be supported if it supports pattern matching rules cor‐
rectly.
The main design goal was to have a set of small and easy to read make‐
files, each located in the project's leaf directory and therefore
called leaf-makefile.
Each of these leaf-makefiles, in fact contains no rule at all. It sim‐
ply defines some macros for the make-program and includes two files
from a central make rule depository. The included files and the files
that are recursively included define the rules that are needed to com‐
pile the project.
Each leaf-makefile is formed in a really simple way:
· It first defines two macros that define the relative location of
the project's root directory and the name of the directory that
contains the complete set of of rules and then includes the rule
file rules.top from the directory that forms the central rule
depository. You only have to edit the macro SRCROOT to reflect
the relative location of the project's root directory.
· The next part of a leaf-makefile defines macros that describe
the target and the source. You can only have one target per
leaf-makefile. Of course, there may be many source files, that
are needed to create that target. If you want to make more than
one target in a specific directory, you have to put more than
one makefile into that directory. This is the part of a make‐
file that describes a unique target. Edit this part to contain
all source files, all local include files and all non global
compile time flags that are needed for your target. For a typi‐
cal target this is as simple as filling in a form.
· Each leaf-makefile finally includes a file from the rules direc‐
tory that contains rules for the appropriate type of target that
is to be made from this leaf-makefile.
The makefile in each directory has to be called Makefile. If you want
to have more than one makefile in a specific directory, you have to
choose different names for the other makefiles.
There are rules for the following type of targets:
commands The make rules for user level commands like cat, ls
etc. are located in the file rules.cmd
drivers The make rules for device drivers are located in
the file rules.drv
libraries The make rules for non shared libraries are located
in the file rules.lib
shared libraries The make rules for shared libraries are located in
the file rules.shl
localized files The make rules for localized files are located in
the file rules.loc
nonlocalized files The make rules for non localized files are located
in the file rules.aux
shell scripts The make rules for shell scripts (a variant of
localized files) are located in the file rules.scr
manual pages The make rules for manual pages (a variant of
localized files) are located in the file rules.man
diverted makefiles The make rules for projects that need to have more
than one makefile in a specific directory are
located in the file rules.mks It contains a rule
that diverts to the listed sub makefiles. Each sub
makefile may be of any type.
directories The make rules for sub directories are located in
the file rules.dir
Macros/Variables Used In Rules
The following is a description of the most important macros used within
the make rules. NOTE: not all of them might be changed in a specific
makefile. Carefully read the description and change only those macros
that are intended to be used to change the behavior of the compilation.
ARCHDIR contains the location where object files and make targets
will be placed. A typical name would be:
OBJ/sparc-sunos5-cc
Do not change this macro.
ASFLAGS The flags that are used with the assembler.
Do not change this macro.
ASMFILES a list of assembler source files, to be specified in a
leaf makefile.
ASOPTS The internal macro that contains the flags for the assem‐
bler. Change this macro if you want to change the behav‐
ior. Use: ASOPTS= value If you want to override the
default value. If you want to override the default assem‐
bler flags from the command line call: make 'ASOPTS=value'
Use: ASOPTS += value If you want to add flags to the
default value from within a makefile.
ASOPTX may be used if you want to add flags to the assembler
flags from the command line. Use: make 'ASOPTX=value'
C_ARCH this macro contains the c-compiler architecture name.
Do not change this macro.
CCOM This macro may be used from the command line to use a dif‐
ferent c-compiler than the default. Use: make 'CCOM=gcc'
to use gcc for the next run. Note: The value of CCOM must
not necessarily be identical to the real name of the c-
compiler. It refers to a filename which contains the def‐
inition for that c-compiler. This hint applies as well to
all other macros that deal with the name of the c-com‐
piler. The only macro, that contains the real invocation
name of the c-compiler, is CC. CC is set inside the
machine dependent configuration file in the central rules
depository and must not be changed elsewhere.
CFILES a list of C source files, to be specified in a leaf make‐
file.
CFLAGS The flags that are used with the c-compiler. Do not use
flags that belong to the c-preprocessor in the COPTOPT,
COPTS and COPTX macros.
Do not change this macro.
CLEAN_FILES A list of files ( besides the object files ) that will be
removed with make clean.
Do not change this macro.
CLEAN_FILEX this macro may be used to define additional files that
should be removed with make clean.
CLOBBER_FILEX
this macro may be used to define additional files that
should be removed with make clobber.
COPTOPT The c-compiler optimization flag. This flag is intended to
be overridden either from a makefile or from command line.
COPTS The internal macro that contains the flags for the c-com‐
piler. Change this macro if you want to change the behav‐
ior. Use: COPTS= value If you want to override the
default value. If you want to override the default c-com‐
piler flags from the command line call: make 'COPTS=value'
Use: COPTS += value If you want to add flags to the
default value from within a makefile.
COPTX may be used if you want to add flags to the c-compiler
flags from the command line. Use: make 'COPTX=value'
CPPFLAGS The flags that are used with the c-preprocessor. This
macro as well as: CPPOPTS and CPPOPTX are also used when
compiling c-programs. They should contain only the fol‐
lowing flags: -Dname=value , -Uname , -Idirectory and
-Ydirectory.
Do not change this macro.
CPPOPTS The internal macro that contains the flags for the c-pre‐
processor. Change this macro if you want to change the
behavior. Use: CPPOPTS= value If you want to override the
default value. If you want to override the default c-pre‐
processor flags from the command line call: make
'CPPOPTS=value' Use: CPPOPTS += value If you want to add
flags to the default value from within a makefile.
CPPOPTX may be used if you want to add flags to the c-preprocessor
flags from the command line. Use: make 'CPPOPTX=value'
CURDIR This macro contains the name of the sub directory that is
currently processed.
Do not change this macro.
CWARNOPTS This macro may be set in $(DEFLTSROOT)/$(DEFLTS‐
DIR)/Defaults or $(DEFLTSROOT)/$(DEFLTS‐
DIR)/Defaults.$(O_ARCH) to overwrite the default c-com‐
piler warn options.
CWOPTS This macro is set inside the machine dependent configura‐
tion file in the central rules depository and must not be
changed elsewhere. It contains the flags that set the
default warning level for the c-compiler.
DEFINSGRP this macro may be set in the projects defaults file to set
up the default group id for installation
DEFINSMODE this macro may be set in the projects defaults file to set
up the default file permission for installation
DEFINSUSR this macro may be set in the projects defaults file to set
up the default user id for installation
DEFUMASK this macro may be set in the projects defaults file to set
up the default umask value for creating sub directories
DEFAULTSDIR this macro may be set from command line or from the shell
environment if the user wants to use a different set of
Defaults files that is not located in the directory
DEFAULTS in the source root directory. This may be used
to hold two or more set of defaults that differ e.g. in
the installation path or the C-compiler.
DEFAULTSROOT this macro may be set in a leaf makefile, if that makefile
wants to use a Defaults file that is not located in
$(DEFAULTSDIR) in the source root. This may be used, if a
sub tree in a big project needs a different setup.
DEFLTSDIR This is an internally used macro that is set from
$(DEFAULTSDIR) or from the internal defaults.
Do not change this macro.
DEFLTSROOT This is an internally used macro that is set from
$(DEFAULTSROOT) or from the internal defaults.
Do not change this macro.
DEFCCOM the default name of the c-compiler. This is usually set in
the file $(DEFLTSROOT)/$(DEFLTSDIR)/Defaults or $(DEFLTS‐
ROOT)/$(DEFLTSDIR)/Defaults.$(O_ARCH).
DEFINCDIRS a list of directories that are searched by default in
addition to the system include directories. If this macro
is not set, $(SRCROOT)/include is used.
DIRNAME this macro needs to be set in the makefile that is located
in the $(SRCROOT) directory. The value should be either
set to the name of the directory where the makefile is
located or to SRCROOT. The value of this macro is updated
automatically to follow the directory hierarchy. Do not
change this macro in a make file other than the make file
in the source root.
DIRS this macro needs to be set in a makefile that is located
in a directory that contains diversion directories. It
must contain a list of directory names where the diver‐
sions go to e.g. DIRS= libfoo libbar libgarbage.
HFILES for normal operation, makefiles will automatically find
which include files are needed for compilation. However,
if you want to create a tag file that includes tags for
definitions that occur within include files, you should
set HFILES to be a list of include files containing such
definitions.
INCDIRS this macro will normally be a copy from DEFINCDIRS. You
may however specify a different value in a leaf makefile
or from command line. This will overwrite the defaults
value.
INS_BASE this macro has to be specified in the file $(DEFLTS‐
ROOT)/$(DEFLTSDIR)/Defaults or $(DEFLTSROOT)/$(DEFLTS‐
DIR)/Defaults.$(O_ARCH). It must contain the path name of
the root for installing general targets of the project.
See INSDIR.
INS_KBASE this macro has to be specified in the file $(DEFLTS‐
ROOT)/$(DEFLTSDIR)/Defaults or $(DEFLTSROOT)/$(DEFLTS‐
DIR)/Defaults.$(O_ARCH). It must contain the path name of
the root for installing kernel modules from the project.
See INSDIR.
INSDIR this macro has to be specified in the leaf makefile. It
must contain the path name of a directory relative to
INS_BASE or INS_KBASE. The target will be installed into
$(INS_BASE)/$(INSDIR) .
INSGRP this macro may be set in a leaf makefile to set up the
group id for installation
INSMODE this macro may be set in a leaf makefile to set up the
file permission for installation
INSUSR this macro may be set in a leaf makefile to set up the
user id for installation
K_ARCH this macro contains the kernel/machine architecture for
the target machine (e.g. sun3 sun4c sun4m sun4u 9000-725
aviion). It is set to the output of uname -m converted to
lower case.
Do not change this macro.
KARCH this macro contains the kernel/machine architecture for
the target machine (e.g. sun3 sun4c sun4m sun4u 9000-725
aviion). It is set to the output of uname -m converted to
lower case.
Do not change this macro unless you want to do a cross
compilation.
LDFLAGS The flags that are used with the linker.
Do not change this macro.
LDLIBS The internal macro that holds the libraries that are used
while linking the target.
Do not change this macro.
LDOPTS The internal macro that contains the flags for the linker.
Change this macro if you want to change the behavior.
Use: LDOPTS= value If you want to override the default
value. If you want to override the default linker flags
from the command line call: make 'LDOPTS=value' Use:
LDOPTS += value If you want to add flags to the default
value from within a makefile.
LDOPTX may be used if you want to add flags to the linker flags
from the command line. Use: make 'LDOPTX=value'
LDPATH the default library search path for the linker. This is
usually set in the file $(DEFLTSROOT)/$(DEFLTS‐
DIR)/Defaults or $(DEFLTSROOT)/$(DEFLTS‐
DIR)/Defaults.$(O_ARCH).
LIB_KVM a predefined macro that contains the operating system
dependent name of a library that is needed by programs
that read/write kernel virtual memory. Add $(LIB_KVM) to
your list of libraries (e.g. LIBS= -lintl $(LIB_KVM)), if
your target uses kvm.
LIB_MATH a predefined macro that contains the operating system
dependent name of a library that is needed by programs
that use routines of the math library. Add $(LIB_MATH) to
your list of libraries (e.g. LIBS= -lintl $(LIB_MATH)),
if your target uses math subroutines.
LIB_SOCKET a predefined macro that contains the operating system
dependent name of a library that is needed by programs
that use socket calls. Add $(LIB_SOCKET) to your list of
libraries (e.g. LIBS= -lintl $(LIB_SOCKET)), if your tar‐
get uses sockets. Note: this should (for portability rea‐
sons) even be done on systems that don't require a socket
library because they have the socket interface inside
libc.
LIBS_PATH this macro contains the path to a directory where those
libraries are located, that have been build during a make
run inside the current project.
Do not change this macro.
M_ARCH this macro contains the machine architecture for the tar‐
get machine (e.g. sun3 sun4 ip22 i86pc i586 9000-725 avi‐
ion). It is set to the output of arch converted to lower
case. On systems, where M_ARCH is not available, it is
set to the content of K_ARCH.
Do not change this macro.
MK_FILES makefiles that divert into sub makes within the same
directory must set MK_FILES to be a list of makefile names
for the sub makes. Makefile names for sub makes should
have a name that is build by adding .mk to the base name
of the target that is defined inside the specific make‐
file.
MAKEPROG Set this macro to the name of your make program if it does
not support the macro MAKE_NAME. The make program smake
is able to identify itself. If you want to use a make
program that is not able to identify itself and it's name
is not make, set MAKEPROG to the name of the make program.
Currently only gmake is supported as alternate value for
MAKEPROG. If you want to use an unsupported make program
you have to check if it supports the needed features for
makefiles. You must write your own rule files for that
make program. If you want to use gmake, you should do
setenv MAKEPROG gmake before you start gmake or use a
shell script that does this job for you.
MAKE This macro is set up by the make program. It contains a
path name that is sufficient to recursively call the same
make program again (either that last path component or the
full path name of the make program).
Do not change this macro.
MAKEFLAGS This macro is set up by the make program. It contains the
command line flags, make is called with.
Do not change this macro.
MAKE_ARCH This macro is currently set up by smake only. It contains
the processor architecture of the target machine (e.g.
mc68020, sparc, pentium).
Do not change this macro.
MAKE_BRAND This macro is currently set up by smake only. It contains
the brand of the target machine (e.g. Sun_Microsys‐
tems(e.g. ).
Do not change this macro.
MAKE_HOST This macro is currently set up by smake only. It contains
the host name of the target machine (e.g. duffy, sherwood,
ghost).
Do not change this macro.
MAKE_MACH This macro is currently set up by smake only. It contains
the kernel architecture of the target machine (e.g. sun3,
sun4c, sun4m, sun4u).
Do not change this macro.
MAKE_MODEL This macro is currently set up by smake only. It contains
the model name of the target machine (e.g. SUNW,SPARCsta‐
tion-20).
Do not change this macro.
MAKE_M_ARCH This macro is currently set up by smake only. It contains
the machine architecture of the target machine (e.g. sun3,
sun4).
Do not change this macro.
MAKE_NAME This macro is currently set up by smake only. It contains
the official name of the make program (e.g. make, smake,
gmake).
Do not change this macro.
MAKE_OS This macro is currently set up by smake only. It contains
the operating system name of the target machine (e.g.
sunos, linux, dgux).
Do not change this macro.
MAKE_OSDEFS This macro is currently set up by smake only. It contains
operating system specific defines for the compiler (e.g.
-D__SVR4).
Do not change this macro.
MAKE_OSREL This macro is currently set up by smake only. It contains
the operating system release name of the target machine
(e.g. 5.5, 4.1.1).
Do not change this macro.
MAKE_OSVERSION
This macro is currently set up by smake only. It contains
the operating system version of the target machine (e.g.
generic).
Do not change this macro.
MAKE_SERIAL This macro is currently set up by smake only. It contains
the serial number of the target machine (e.g. 1920098175).
Do not change this macro.
MANDIR all makefiles for manual pages must set this macro to the
path name relative to INS_BASE where the manual page root
dir for the project should be. Possible values for eng‐
lish manual pages are man or share/man, possible values
for german manual pages are man/de or share/man/de.
MANFILE makefiles for manual pages set this macro to the name of
the troff source file for the manual page
MANSECT makefiles for manual pages set this macro to the macro
name that contains the real section name for this manual
page. This is necessary because bsd based system have dif‐
ferent naming conventions than system V based systems. See
below for a valid list of manual section macros.
MANSECT_ADMIN
This macro contains the name of the sub directory for
administrative commands and maintenance procedures.
Do not change this macro.
MANSECT_CMD This macro contains the name of the sub directory for gen‐
eral user commands.
Do not change this macro.
MANSECT_DEMOS
This macro contains the name of the sub directory for demo
commands.
Do not change this macro.
MANSECT_DEVICE
This macro contains the name of the sub directory for user
level device interfaces.
Do not change this macro.
MANSECT_DRIVER
This macro contains the name of the sub directory for ker‐
nel level device driver interfaces.
Do not change this macro.
MANSECT_FILEFORM
This macro contains the name of the sub directory for file
formats.
Do not change this macro.
MANSECT_GAMES
This macro contains the name of the sub directory for
games.
Do not change this macro.
MANSECT_HDR This macro contains the name of the sub directory for
header files.
Do not change this macro.
MANSECT_LIB This macro contains the name of the sub directory for
library function interfaces.
Do not change this macro.
MANSECT_MACROS
This macro contains the name of the sub directory for
troff macros.
Do not change this macro.
MANSECT_NETWORK
This macro contains the name of the sub directory for user
level network interfaces.
Do not change this macro.
MANSECT_SYSCALL
This macro contains the name of the sub directory for sys‐
tem call interfaces. Do not change this macro.
MANSECT_TABLES
This macro contains the name of the sub directory for
tables. Do not change this macro.
MANSTYLE This macro contains the name that is used to find the
right ordering conventions for manual pages. Do not
change this macro.
MANSUFFIX makefiles for manual pages set this macro to the macro
name that contains the real suffix for this manual page.
This is necessary because bsd based system have different
naming conventions than system V based systems. See below
for a valid list of manual suffix macros.
MANSUFF_ADMIN
This macro contains the name of the file suffix for admin‐
istrative commands and maintenance procedures.
Do not change this macro.
MANSUFF_CMD This macro contains the name of the file suffix for gen‐
eral user commands.
Do not change this macro.
MANSUFF_DEMOS
This macro contains the name of the file suffix for demo
commands.
Do not change this macro.
MANSUFF_DEVICE
This macro contains the name of the file suffix for user
level device interfaces.
Do not change this macro.
MANSUFF_DRIVER
This macro contains the name of the file suffix for kernel
level device driver interfaces.
Do not change this macro.
MANSUFF_FILEFORM
This macro contains the name of the file suffix for file
formats.
Do not change this macro.
MANSUFF_GAMES
This macro contains the name of the file suffix for games.
Do not change this macro.
MANSUFF_HDR This macro contains the name of the file suffix for header
files.
Do not change this macro.
MANSUFF_LIB This macro contains the name of the file suffix for
library function interfaces.
Do not change this macro.
MANSUFF_MACROS
This macro contains the name of the file suffix for troff
macros.
Do not change this macro.
MANSUFF_NETWORK
This macro contains the name of the file suffix for user
level network interfaces.
Do not change this macro.
MANSUFF_SYSCALL
This macro contains the name of the file suffix for system
call interfaces. Do not change this macro.
MANSUFF_TABLES
This macro contains the name of the file suffix for
tables. Do not change this macro.
MARCH this macro contains the machine architecture for the tar‐
get machine (e.g. sun3 sun4 ip22 i86pc i586 9000-725 avi‐
ion). It is set to the output of arch converted to lower
case. On systems, where M_ARCH is not available, it is
set to the content of K_ARCH.
Do not change this macro unless you want to do a cross
compilation.
O_ARCH this macro contains the name of the operating system con‐
verted to lower case. It is usually the output of: uname
-s. It may contain a modified name if the compilation
rules for different version of the operating system differ
(e.g. on SunOS and Solaris, the official operation system
name in both cases is SunOS).
Do not change this macro.
OARCH this macro contains the object architecture that is used
for architecture dependent sub directories. It is set to:
$(PARCH)-$(O_ARCH)-$(C_ARCH).
Do not change this macro.
OARCHDIR this macro contains the concatenation of OBJ/ and
$(OARCH).
Do not change this macro.
OFILES this macro contains the list of objects that are the the
dependency list for the target. It is constructed from
the list of assembler source files, c source files, lex
source files and yacc source files.
Do not change this macro.
OINCSDIR this macro contains the concatenation of $(SRCROOT)/incs/
and $(OARCH). It is the location where include files that
are made within a make run and subject to global use will
be placed.
Do not change this macro.
OLIBSDIR this macro contains the concatenation of $(SRCROOT)/libs/
and $(OARCH). It is the location where libraries that are
made within a make run will be placed.
Do not change this macro.
OSDEFS this macro contains operating system specific c-preproces‐
sor definitions.
Do not change this macro.
OSNAME the unmodified name of the operating system converted to
lower case. See O_ARCH.
Do not change this macro.
OSREL the release of the operating system.
Do not change this macro.
P_ARCH this macro contains the processor architecture for the
target machine (e.g. mc68020 mc88200 sparc pentium). It
is set to the output of uname -p converted to lower case.
On systems, where P_ARCH is not available, it is set to
the content of K_ARCH.
Do not change this macro.
PARCH this macro contains the processor architecture for the
target machine (e.g. mc68020 mc88200 sparc pentium). It
is set to the output of uname -p converted to lower case.
On systems, where P_ARCH is not available, it is set to
the content of K_ARCH.
Do not change this macro unless you want to do a cross
compilation.
RULESDIR the value of this macro must be set before the rules file
$(SRCROOT)/$(RULESDIR/rules.top is included. If you want
to test the behavior of a modified version of the make‐
files in RULESDIR, put a copy into an alternate directory,
modify one or more files in it and then use make with a
different value of RULESDIR, that points to the alternate
directory.
RUNPATH is evaluated on systems, where LD_RUN_PATH is supported.
It contains the default library search path for dynamic
linked targets on runtime. This search path will be
stored inside the target. This is usually set in the file
$(DEFLTSROOT)/$(DEFLTSDIR)/Defaults or $(DEFLTS‐
ROOT)/$(DEFLTSDIR)/Defaults.$(O_ARCH). Note that older
systems will use LD_LIBRARY_PATH for this purpose too.
SCRFILE this macro must be set in a leaf makefile for shell
scripts to define the source for that script file.
SRCFILE this macro must be set in a leaf makefile for localized
files to define the source for that file.
SRCROOT this macro contains the relative position to the project's
source root directory. The value of this macro must be
set before the rules file $(SRCROOT)/$(RULESDIR/rules.top
is included. SRCROOT should be set to ../.. if the
appropriate leaf makefile is located two directory levels
below the source route.
SUBARCHDIR may be set to put the object files and the target into a
different directory than usual. SUBARCHDIR will modify
the value of ARCHDIR. If you want to make a target that
is compiled for dbx you may use: make COPTX=-g SUB‐
ARCHDIR=-dbx.
TARGET all makefiles, that are not referring to library targets
or sub makes / sub dir makes, must define TARGET to be the
output file name of the final link operation.
TARGETLIB all makefiles that are used to make libraries must define
TARGETLIB to be the central part of the target library.
If you want to make e.g. libfoo define TARGETLIB= foo.
This is needed to allow operating systems to have differ‐
ent naming conventions for libraries. If you are making a
non shared library, the example above would result in a
filename: libfoo.a for the real target.
TARGETMAN this macro must be set in a leaf makefile for manual pages
to define the base name for that manual page (not includ‐
ing the suffix).
XMK_FILE makefiles that want to install manual pages should set
XMK_FILE to Makefile.man to avoid having to install a
diversion make file. The make file found in XMK_FILE will
be processed only if make is called with the target
install.
GETTING STARTED
To set up a new project, first copy the RULES and TEMPLATES directories
and all its content into the project's root directory.
Then copy a top level makefile, a Defaults file and a Targetdirs.arch‐
name file into the project's root directory.
Then create the following directories: cmd, lib, include.
Now start creating target directories e.g below cmd and lib. Don't
forget to create a makefile and an appropriate Targetdirs.archname file
on each node directory.
EXAMPLES
If you want to set up a private copy of parts of a project, you should
choose a directory inside your directory tree that will become the
shadow projects source root directory. Then create symbolic links
named RULES and TEMPLATES to the real source root. If you don't want
to modify the global include files, create a symbolic link to the
include directory too, else copy the include directory and its content.
copy the top level makefile, the Defaults file and the Targetdirs.arch‐
name file.
Finally copy the desired sub tree together with all makefiles and the
Targetdirs.archname files that are located in the directories above
your part of the project that you want to have separately.
FILES
.../RULES/*
.../DEFAULTS/*
.../TARGETS/*
.../TEMPLATES/*
SEE ALSOmakerules(4), make(1), gmake(1), smake(1).
If you want to know, how to add new rules or how to add support for new
operating systems or compilers look into makerules(4).
DIAGNOSTICS
Diagnostic messages depend on the make program. Have a look at the
appropriate man page.
NOTES
The scope of this manual is only the usage of leaf makefiles. If you
want to make changes to the make rules have a look at makerules(4).
makefiles can be used with Sunpro make, Gnu make and smake. Although
Gnu make runs on many platforms, it has no useful debug output.
Use Sunpro make or smake if you have problems with a makefile. Sunpro
make and smake, both have a -D flag, that allows you to watch the make‐
files after the first expansion. Use this option, if you are in doubt
if your makefile gets expanded the right way and if the right rules are
included. There is also a -d option that gives debugging output while
make is running. If you want more output, use -dd, -ddd and so on.
Smake has an option -xM that shows you the include dependency for make
rules.
The following is a list of all macros that are used in makefiles. Do
not use them unless their meaning has been explained before.
-O_ARCH, .OBJDIR, .SEARCHLIST, ALLTARGETS, AR, ARCH, ARCHDIR, ARCHDIRX,
ARCH_DONE, ARFLAGS, AS, ASFLAGS, ASMFILES, ASOPTS, ASOPTX, CC, CCOM,
CCOM_DEF, CFILES, CFLAGS, CHGRP, CHMOD, CHOWN, CLEAN_FILES,
CLEAN_FILEX, CLOBBER_FILEX, COPTDYN, COPTGPROF, COPTOPT, COPTS, COPTX,
CPP, CPPFLAGS, CPPOPTS, CPPOPTX, CTAGS, CURDIR, CWARNOPTS, CWOPTS,
C_ARCH, DEFAULTSDIR, DEFAULTSROOT, DEFCCOM, DEFCCOM_DEF, DEFINCDIRS,
DEFINCDIRS_DEF, DEFINSGRP, DEFINSMODE, DEFINSUSR, DEFUMASK, DEF_ROOT,
DEP_DEP, DEP_FILE, DEP_SUFFIX, DIRNAME, DIRS, DYNLD, ETAGS,
FLOAT_OPTIONS, HFILES, HOSTNAME, INCDIRS, INSDIR, INSGRP, INSGRP_DEF,
INSMODE, INSMODE_DEF, INSTALL, INSUSR, INSUSR_DEF, INS_BASE, INS_KBASE,
KARCH, KARCH_DEF, KDEFINES, K_ARCH, LD, LDCC, LDFLAGS, LDLIBS, LDOPT‐
DYN, LDOPTS, LDOPTX, LDPATH, LIBS, LIBS_PATH, LIBX, LIB_KVM, LIB_MATH,
LIB_PREFIX, LIB_SOCKET, LIB_SUFFIX, LN, LNDYNLIB, LOCALIZE, LORDER,
MAKE, MK_FILES, MAKEPROG, MAKE_ARCH, MAKE_HOST, MAKE_MACH, MAKE_M_ARCH,
MAKE_NAME, MAKE_OS, MAKE_OSDEFS, MAKE_OSREL, MANDIR, MANFILE, MANSECT,
MANSECT_ADMIN, MANSECT_CMD, MANSECT_DEMOS, MANSECT_DEVICE, MAN‐
SECT_DRIVER, MANSECT_FILEFORM, MANSECT_GAMES, MANSECT_HDR, MANSECT_LIB,
MANSECT_MACROS, MANSECT_NETWORK, MANSECT_SYSCALL, MANSECT_TABLES,
MANSTYLE, MANSUFFIX, MANSUFF_ADMIN, MANSUFF_CMD, MANSUFF_DEMOS, MAN‐
SUFF_DEVICE, MANSUFF_DRIVER, MANSUFF_FILEFORM, MANSUFF_GAMES, MAN‐
SUFF_HDR, MANSUFF_LIB, MANSUFF_MACROS, MANSUFF_NETWORK, MAN‐
SUFF_SYSCALL, MANSUFF_TABLES, MARCH, MARCH_DEF, MKDEP, MKDEP_OUT,
MKDIR, MV, M_ARCH, OARCH, OARCHDIR, OFILES, OINCSDIR, OLIBSDIR, OSDEFS,
OSNAME, OSREL, O_ARCH, PALLDEP_FILE, PARCH, PARCH_DEF, PASMFILES,
PDEP_FILE, PLOFILES, POFILES, PTARGET, PTARGET_BASE, PYOFILES, P_ARCH,
RANLIB, RM, RMDEP, RMTARGET, RM_FORCE, RM_RECURS, RM_RF, RULESDIR, RUN‐
PATH, SCRFILE, SHELL, SHL_SUFFIX, SRCFILE, SRCLIBS, SRCROOT, SUBARCH,
SUBARCHDIR, SYMLINK, TAGS, TARGET, TARGETLIB, TARGETMAN, TARGET_BASE,
TARGET_PATH, TSORT, UMASK, UMASK_DEF, UMASK_VAL, XARCH, XK_ARCH,
XMK_FILE, XMAKEPROG, XM_ARCH, XP_ARCH, _CCOM, _DEFAULTSDIR, _DEFCCOM,
_DEFINSGRP, _DEFINSMODE, _DEFINSUSR, _DEFUMASK, _DIRNAME, _INCDIRS,
_MAKEPROG, _MARCH, _M_ARCH, _O_ARCH, _PARCH, _P_ARCH, _UNIQ, __CCOM,
__DEFAULTSDIR, __DEFCCOM, __DEFINSGRP, __DEFINSMODE, __DEFINSUSR,
__DEFUMASK, __DIRNAME, __INCDIRS, __MAKEPROG, __MARCH, __M_ARCH,
__PARCH, __P_ARCH,
BUGSSource Tree Hierarchy
The following outline gives a quick tour through a typical source hier‐
archy:
.../ root directory of the source tree
Makefile
the top Makefile
Targetdirs
a file containing a list of directories that are needed
for that project. If the system needs different target
lists depending on the target system architecture , use
target specific files in .../TARGETS/
...
.../RULES/
the location of makefiles (included rules)
rules.top
the mandatory include rules (needed to setup basic rules)
rules.aux
rules needed to install a non localized auxiliary file
rules.cmd
rules needed to make an ordinary command (like /bin/sh)
rules.drv
rules needed to make a device driver
rules.lib
rules needed to make a standard (nonshared) library
rules.loc
rules needed to install a localized auxiliary file
rules.man
rules needed to install a localized manual page
rules.scr
rules needed to install a localized shell script
rules.shl
rules needed to make a shared library
rules.mks
rules needed to make more than one target in a specific
directory
rules.dir
rules needed to make targets that are located in sub
directories to the current directory
...
.../DEFAULTS/
default definitions for various target architectures are located
in this directory. Templates for some architectures can be found
in the .../TEMPLATES/ directory.
Defaults
default definitions for that source tree. System
dependent definitions are in .../DEFAULTS/Defaults.*
.../TARGETS/
target list definitions for various target architectures are
located in this directory.
.../TEMPLATES/
templates that should be used inside the project (rename to
Makefile, if it is the only makefile in that directory, rename
to target.mk, if there is more than one target in that
directory)
Defaults
Defaults file for the source root directory
Defaults.linux
Defaults file for linux. This should be installed in the
.../DEFAULTS/ directory.
Makefile.root
Makefile for the source root directory
Makefile.aux
Makefile for a non localized auxiliary file
Makefile.cmd
Makefile for an ordinary command (like /bin/sh)
Makefile.lib
Makefile for a standard (nonshared) library
Makefile.loc
Makefile for a localized auxiliary file
Makefile.man
Makefile for a localized manual page
Makefile_de.man
Makefile for a localized manual page in the german locale
Makefile.scr
Makefile for a localized shell script
Makefile.shl
Makefile for a shared library
Makefile.drv
Makefile for a device driver
Makefile.mks
Makefile for more than one target in a specific directory
Makefile.dir
Makefile for targets that are located in sub directories
to the current directory
...
.../cmd/
source tree for normal commands
Makefile
the makefile for the cmd sub directory
Targetdirs.sun4m
a file containing a list of directories like myprog (see
below) that are needed for that specific architecture.
myprog/
directory where the sources for a specific command are
located
Makefile
makefile for myprog
Makefile.man
makefile for the manual page of myprog
mprog.c
source for myprog
mprog.tr
troff source for the manual page of myprog
OBJ/ directory where system specific sub directories
are located
sparc-sunos5-cc/
directory for binaries that belong to a
specific system
...
...
...
.../lib/
directory where the sources for a libraries are located
Makefile
the makefile for the lib sub directory
Targetdirs.sun4m
a file containing a list of directories like libfoo (see
below) that are needed for that specific architecture.
libfoo/
directory where all source files for libfoo are located
...
.../kernel
directory for kernel modules
Makefile
the makefile for the kernel sub directory
Targetdirs.sun4m
a file containing a list of directories like drv (see
below) that are needed for that specific architecture.
drv/ directory where drivers are located
Makefile
the makefile for the drv sub directory
Targetdirs.sun4m
a file containing a list of directories like mydrv
(see below) that are needed for that specific
architecture.
mydrv/ source for a specific driver
...
...
.../include
directory for global include files that are used in that project
.../bins
directory for binary programs that are created/needed while
compiling the project
sparc-sunos5-cc/
directory for binaries that belong to a specific system
...
.../libs
directory for libraries that are created/needed while compiling
the project
sparc-sunos5-cc/
directory for libraries that belong to a specific system
...
.../incs
directory for include files that are created/needed while
compiling the project
sparc-sunos5-cc/
directory for include files that belong to a specific
system
...
...
AUTHOR
Joerg Schilling
Seestr. 110
D-13353 Berlin
Germany
Mail bugs and suggestions to:
joerg@schily.isdn.cs.tu-berlin.de or js@cs.tu-berlin.de or
jes@fokus.gmd.de
Joerg Schilling 14. February 1997 makefiles(4L)