CHARSETS(7) Linux Programmer's Manual CHARSETS(7)NAMEcharsets - programmer's view of character sets and internationalization
DESCRIPTION
Linux is an international operating system. Various of its utilities
and device drivers (including the console driver) support multilingual
character sets including Latin-alphabet letters with diacritical marks,
accents, ligatures, and entire non-Latin alphabets including Greek,
Cyrillic, Arabic, and Hebrew.
This manual page presents a programmer's-eye view of different charac‐
ter-set standards and how they fit together on Linux. Standards dis‐
cussed include ASCII, ISO 8859, KOI8-R, Unicode, ISO 2022 and ISO 4873.
The primary emphasis is on character sets actually used as locale char‐
acter sets, not the myriad others that can be found in data from other
systems.
A complete list of charsets used in an officially supported locale in
glibc 2.2.3 is: ISO-8859-{1,2,3,5,6,7,8,9,13,15}, CP1251, UTF-8,
EUC-{KR,JP,TW}, KOI8-{R,U}, GB2312, GB18030, GBK, BIG5, BIG5-HKSCS and
TIS-620 (in no particular order.) (Romanian may be switching to
ISO-8859-16.)
ASCII
ASCII (American Standard Code For Information Interchange) is the orig‐
inal 7-bit character set, originally designed for American English. It
is currently described by the ECMA-6 standard.
Various ASCII variants replacing the dollar sign with other currency
symbols and replacing punctuation with non-English alphabetic charac‐
ters to cover German, French, Spanish, and others in 7 bits exist. All
are deprecated; glibc doesn't support locales whose character sets
aren't true supersets of ASCII. (These sets are also known as ISO-646,
a close relative of ASCII that permitted replacing these characters.)
As Linux was written for hardware designed in the US, it natively sup‐
ports ASCII.
ISO 8859
ISO 8859 is a series of 15 8-bit character sets all of which have US
ASCII in their low (7-bit) half, invisible control characters in posi‐
tions 128 to 159, and 96 fixed-width graphics in positions 160-255.
Of these, the most important is ISO 8859-1 (Latin-1). It is natively
supported in the Linux console driver, fairly well supported in X11R6,
and is the base character set of HTML.
Console support for the other 8859 character sets is available under
Linux through user-mode utilities (such as setfont(8)) that modify key‐
board bindings and the EGA graphics table and employ the "user mapping"
font table in the console driver.
Here are brief descriptions of each set:
8859-1 (Latin-1)
Latin-1 covers most Western European languages such as Albanian,
Catalan, Danish, Dutch, English, Faroese, Finnish, French, Ger‐
man, Galician, Irish, Icelandic, Italian, Norwegian, Portuguese,
Spanish, and Swedish. The lack of the ligatures Dutch ij,
French oe and old-style ,,German`` quotation marks is considered
tolerable.
8859-2 (Latin-2)
Latin-2 supports most Latin-written Slavic and Central European
languages: Croatian, Czech, German, Hungarian, Polish, Rumanian,
Slovak, and Slovene.
8859-3 (Latin-3)
Latin-3 is popular with authors of Esperanto, Galician, and Mal‐
tese. (Turkish is now written with 8859-9 instead.)
8859-4 (Latin-4)
Latin-4 introduced letters for Estonian, Latvian, and Lithua‐
nian. It is essentially obsolete; see 8859-10 (Latin-6) and
8859-13 (Latin-7).
8859-5 Cyrillic letters supporting Bulgarian, Byelorussian, Macedonian,
Russian, Serbian, and Ukrainian. Ukrainians read the letter
"ghe" with downstroke as "heh" and would need a ghe with
upstroke to write a correct ghe. See the discussion of KOI8-R
below.
8859-6 Supports Arabic. The 8859-6 glyph table is a fixed font of sep‐
arate letter forms, but a proper display engine should combine
these using the proper initial, medial, and final forms.
8859-7 Supports Modern Greek.
8859-8 Supports modern Hebrew without niqud (punctuation signs). Niqud
and full-fledged Biblical Hebrew are outside the scope of this
character set; under Linux, UTF-8 is the preferred encoding for
these.
8859-9 (Latin-5)
This is a variant of Latin-1 that replaces Icelandic letters
with Turkish ones.
8859-10 (Latin-6)
Latin 6 adds the last Inuit (Greenlandic) and Sami (Lappish)
letters that were missing in Latin 4 to cover the entire Nordic
area. RFC 1345 listed a preliminary and different "latin6".
Skolt Sami still needs a few more accents than these.
8859-11
This exists only as a rejected draft standard. The draft stan‐
dard was identical to TIS-620, which is used under Linux for
Thai.
8859-12
This set does not exist. While Vietnamese has been suggested
for this space, it does not fit within the 96 (noncombining)
characters ISO 8859 offers. UTF-8 is the preferred character
set for Vietnamese use under Linux.
8859-13 (Latin-7)
Supports the Baltic Rim languages; in particular, it includes
Latvian characters not found in Latin-4.
8859-14 (Latin-8)
This is the Celtic character set, covering Gaelic and Welsh.
This charset also contains the dotted characters needed for Old
Irish.
8859-15 (Latin-9)
This adds the Euro sign and French and Finnish letters that were
missing in Latin-1.
8859-16 (Latin-10)
This set covers many of the languages covered by 8859-2, and
supports Romanian more completely then that set does.
KOI8-R
KOI8-R is a non-ISO character set popular in Russia. The lower half is
US ASCII; the upper is a Cyrillic character set somewhat better
designed than ISO 8859-5. KOI8-U is a common character set, based off
KOI8-R, that has better support for Ukrainian. Neither of these sets
are ISO-2022 compatible, unlike the ISO-8859 series.
Console support for KOI8-R is available under Linux through user-mode
utilities that modify keyboard bindings and the EGA graphics table, and
employ the "user mapping" font table in the console driver.
JIS X 0208
JIS X 0208 is a Japanese national standard character set. Though there
are some more Japanese national standard character sets (like JIS X
0201, JIS X 0212, and JIS X 0213), this is the most important one.
Characters are mapped into a 94x94 two-byte matrix, whose each byte is
in the range 0x21-0x7e. Note that JIS X 0208 is a character set, not
an encoding. This means that JIS X 0208 itself is not used for
expressing text data. JIS X 0208 is used as a component to construct
encodings such as EUC-JP, Shift_JIS, and ISO-2022-JP. EUC-JP is the
most important encoding for Linux and includes US ASCII and JIS X 0208.
In EUC-JP, JIS X 0208 characters are expressed in two bytes, each of
which is the JIS X 0208 code plus 0x80.
KS X 1001
KS X 1001 is a Korean national standard character set. Just as JIS X
0208, characters are mapped into a 94x94 two-byte matrix. KS X 1001 is
used like JIS X 0208, as a component to construct encodings such as
EUC-KR, Johab, and ISO-2022-KR. EUC-KR is the most important encoding
for Linux and includes US ASCII and KS X 1001. KS C 5601 is an older
name for KS X 1001.
GB 2312
GB 2312 is a mainland Chinese national standard character set used to
express simplified Chinese. Just like JIS X 0208, characters are
mapped into a 94x94 two-byte matrix used to construct EUC-CN. EUC-CN
is the most important encoding for Linux and includes US ASCII and GB
2312. Note that EUC-CN is often called as GB, GB 2312, or CN-GB.
Big5
Big5 is a popular character set in Taiwan to express traditional Chi‐
nese. (Big5 is both a character set and an encoding.) It is a super‐
set of US ASCII. Non-ASCII characters are expressed in two bytes.
Bytes 0xa1-0xfe are used as leading bytes for two-byte characters.
Big5 and its extension is widely used in Taiwan and Hong Kong. It is
not ISO 2022-compliant.
TIS 620
TIS 620 is a Thai national standard character set and a superset of US
ASCII. Like ISO 8859 series, Thai characters are mapped into
0xa1-0xfe. TIS 620 is the only commonly used character set under Linux
besides UTF-8 to have combining characters.
UNICODE
Unicode (ISO 10646) is a standard which aims to unambiguously represent
every character in every human language. Unicode's structure permits
20.1 bits to encode every character. Since most computers don't
include 20.1-bit integers, Unicode is usually encoded as 32-bit inte‐
gers internally and either a series of 16-bit integers (UTF-16) (need‐
ing two 16-bit integers only when encoding certain rare characters) or
a series of 8-bit bytes (UTF-8). Information on Unicode is available
at ⟨http://www.unicode.org⟩.
Linux represents Unicode using the 8-bit Unicode Transformation Format
(UTF-8). UTF-8 is a variable length encoding of Unicode. It uses 1
byte to code 7 bits, 2 bytes for 11 bits, 3 bytes for 16 bits, 4 bytes
for 21 bits, 5 bytes for 26 bits, 6 bytes for 31 bits.
Let 0,1,x stand for a zero, one, or arbitrary bit. A byte 0xxxxxxx
stands for the Unicode 00000000 0xxxxxxx which codes the same symbol as
the ASCII 0xxxxxxx. Thus, ASCII goes unchanged into UTF-8, and people
using only ASCII do not notice any change: not in code, and not in file
size.
A byte 110xxxxx is the start of a 2-byte code, and 110xxxxx 10yyyyyy is
assembled into 00000xxx xxyyyyyy. A byte 1110xxxx is the start of a
3-byte code, and 1110xxxx 10yyyyyy 10zzzzzz is assembled into xxxxyyyy
yyzzzzzz. (When UTF-8 is used to code the 31-bit ISO 10646 then this
progression continues up to 6-byte codes.)
For most people who use ISO-8859 character sets, this means that the
characters outside of ASCII are now coded with two bytes. This tends
to expand ordinary text files by only one or two percent. For Russian
or Greek users, this expands ordinary text files by 100%, since text in
those languages is mostly outside of ASCII. For Japanese users this
means that the 16-bit codes now in common use will take three bytes.
While there are algorithmic conversions from some character sets (espe‐
cially ISO-8859-1) to Unicode, general conversion requires carrying
around conversion tables, which can be quite large for 16-bit codes.
Note that UTF-8 is self-synchronizing: 10xxxxxx is a tail, any other
byte is the head of a code. Note that the only way ASCII bytes occur
in a UTF-8 stream, is as themselves. In particular, there are no
embedded NULs ('\0') or '/'s that form part of some larger code.
Since ASCII, and, in particular, NUL and '/', are unchanged, the kernel
does not notice that UTF-8 is being used. It does not care at all what
the bytes it is handling stand for.
Rendering of Unicode data streams is typically handled through "sub‐
font" tables which map a subset of Unicode to glyphs. Internally the
kernel uses Unicode to describe the subfont loaded in video RAM. This
means that in UTF-8 mode one can use a character set with 512 different
symbols. This is not enough for Japanese, Chinese and Korean, but it
is enough for most other purposes.
At the current time, the console driver does not handle combining char‐
acters. So Thai, Sioux and any other script needing combining charac‐
ters can't be handled on the console.
ISO 2022 and ISO 4873
The ISO 2022 and 4873 standards describe a font-control model based on
VT100 practice. This model is (partially) supported by the Linux ker‐
nel and by xterm(1). It is popular in Japan and Korea.
There are 4 graphic character sets, called G0, G1, G2, and G3, and one
of them is the current character set for codes with high bit zero (ini‐
tially G0), and one of them is the current character set for codes with
high bit one (initially G1). Each graphic character set has 94 or 96
characters, and is essentially a 7-bit character set. It uses codes
either 040-0177 (041-0176) or 0240-0377 (0241-0376). G0 always has
size 94 and uses codes 041-0176.
Switching between character sets is done using the shift functions ^N
(SO or LS1), ^O (SI or LS0), ESC n (LS2), ESC o (LS3), ESC N (SS2), ESC
O (SS3), ESC ~ (LS1R), ESC } (LS2R), ESC | (LS3R). The function LSn
makes character set Gn the current one for codes with high bit zero.
The function LSnR makes character set Gn the current one for codes with
high bit one. The function SSn makes character set Gn (n=2 or 3) the
current one for the next character only (regardless of the value of its
high order bit).
A 94-character set is designated as Gn character set by an escape
sequence ESC ( xx (for G0), ESC ) xx (for G1), ESC * xx (for G2), ESC +
xx (for G3), where xx is a symbol or a pair of symbols found in the ISO
2375 International Register of Coded Character Sets. For example, ESC
( @ selects the ISO 646 character set as G0, ESC ( A selects the UK
standard character set (with pound instead of number sign), ESC ( B
selects ASCII (with dollar instead of currency sign), ESC ( M selects a
character set for African languages, ESC ( ! A selects the Cuban char‐
acter set, and so on.
A 96-character set is designated as Gn character set by an escape
sequence ESC - xx (for G1), ESC . xx (for G2) or ESC / xx (for G3).
For example, ESC - G selects the Hebrew alphabet as G1.
A multibyte character set is designated as Gn character set by an
escape sequence ESC $ xx or ESC $ ( xx (for G0), ESC $ ) xx (for G1),
ESC $ * xx (for G2), ESC $ + xx (for G3). For example, ESC $ ( C
selects the Korean character set for G0. The Japanese character set
selected by ESC $ B has a more recent version selected by ESC & @ ESC $
B.
ISO 4873 stipulates a narrower use of character sets, where G0 is fixed
(always ASCII), so that G1, G2 and G3 can be invoked only for codes
with the high order bit set. In particular, ^N and ^O are not used
anymore, ESC ( xx can be used only with xx=B, and ESC ) xx, ESC * xx,
ESC + xx are equivalent to ESC - xx, ESC . xx, ESC / xx, respectively.
SEE ALSOconsole(4), console_codes(4), console_ioctl(4), ascii(7),
iso_8859-1(7), unicode(7), utf-8(7)COLOPHON
This page is part of release 3.58 of the Linux man-pages project. A
description of the project, and information about reporting bugs, can
be found at http://www.kernel.org/doc/man-pages/.
Linux 2012-08-05 CHARSETS(7)