GPIC man page on Ultrix

Man page or keyword search:  
man Server   3690 pages
apropos Keyword Search (all sections)
Output format
Ultrix logo
[printable version]

GPIC(1)								       GPIC(1)

NAME
       gpic - compile pictures for troff or TeX

SYNOPSIS
       gpic [ -nvCSU ] [ filename ...  ]
       gpic -t [ -cvzCSU ] [ filename ...  ]

DESCRIPTION
       This manual page describes the GNU version of pic, which is part of the
       groff document formatting system.  pic compiles	descriptions  of  pic‐
       tures  embedded	within troff or TeX input files into commands that are
       understood by TeX or troff.  Each picture starts with a line  beginning
       with  .PS and ends with a line beginning with .PE.  Anything outside of
       .PS and .PE is passed through without change.

       It is the user's responsibility to provide appropriate  definitions  of
       the  PS and PE macros.  When the macro package being used does not sup‐
       ply such definitions (for example, old versions	of  -ms),  appropriate
       definitions can be obtained with -mpic: these will center each picture.

OPTIONS
       Options	that  do  not take arguments may be grouped behind a single -.
       The special option -- can be used to mark the end of  the  options.   A
       filename of - refers to the standard input.

       -C     Recognize	 .PS  and  .PE even when followed by a character other
	      than space or newline.

       -S     Safer mode; do not execute sh commands.  This can be useful when
	      operating on untrustworthy input.	 (enabled by default)

       -U     Unsafe mode; revert the default option -S.

       -n     Don't  use  the  groff extensions to the troff drawing commands.
	      You should use this  if  you  are	 using	a  postprocessor  that
	      doesn't  support these extensions.  The extensions are described
	      in groff_out(5).	The -n option also causes pic not to use zero-
	      length lines to draw dots in troff mode.

       -t     TeX mode.

       -c     Be more compatible with tpic.  Implies -t.  Lines beginning with
	      \ are not passed through transparently.  Lines beginning with  .
	      are  passed  through  with  the initial .	 changed to \.	A line
	      beginning with .ps is  given  special  treatment:	 it  takes  an
	      optional	integer	 argument  specifying  the line thickness (pen
	      size) in milliinches; a missing argument restores	 the  previous
	      line  thickness;	the  default  line thickness is 8 milliinches.
	      The line thickness thus specified takes effect only when a  non-
	      negative	line  thickness	 has  not been specified by use of the
	      thickness attribute or by setting the linethick variable.

       -v     Print the version number.

       -z     In TeX mode draw dots using zero-length lines.

       The following options supported by other versions of pic are ignored:

       -D     Draw all lines using the \D escape sequence.   pic  always  does
	      this.

       -T dev Generate	output	for the troff device dev.  This is unnecessary
	      because the troff output generated by pic is device-independent.

USAGE
       This section describes only the differences between  GNU	 pic  and  the
       original version of pic.	 Many of these differences also apply to newer
       versions of Unix pic.

   TeX mode
       TeX mode is enabled by the -t option.  In TeX mode, pic will  define  a
       vbox called \graph for each picture.  You must yourself print that vbox
       using, for example, the command

	      \centerline{\box\graph}

       Actually, since the vbox	 has  a	 height	 of  zero  this	 will  produce
       slightly more vertical space above the picture than below it;

	      \centerline{\raise 1em\box\graph}

       would avoid this.

       You must use a TeX driver that supports the tpic specials, version 2.

       Lines  beginning	 with \ are passed through transparently; a % is added
       to the end of the line to avoid unwanted spaces.	 You  can  safely  use
       this  feature  to change fonts or to change the value of \baselineskip.
       Anything else may well produce undesirable results;  use	 at  your  own
       risk.   Lines  beginning with a period are not given any special treat‐
       ment.

   Commands
       for variable = expr1 to expr2 [by [*]expr3] do X body X
	      Set variable to expr1.  While the value of variable is less than
	      or  equal	 to expr2, do body and increment variable by expr3; if
	      by is not given, increment variable by 1.	 If expr3 is  prefixed
	      by  *  then variable will instead be multiplied by expr3.	 X can
	      be any character not occurring in body.

       if expr then X if-true X [else Y if-false Y]
	      Evaluate expr; if it is non-zero then do if-true,	 otherwise  do
	      if-false.	  X  can be any character not occurring in if-true.  Y
	      can be any character not occurring in if-false.

       print arg...
	      Concatenate the arguments and print as a line on	stderr.	  Each
	      arg  must be an expression, a position, or text.	This is useful
	      for debugging.

       command arg...
	      Concatenate the arguments and pass them through  as  a  line  to
	      troff  orTeX.   Each  arg	 must be an expression, a position, or
	      text.  This has a similar effect to a line beginning with .   or
	      \, but allows the values of variables to be passed through.

       sh X command X
	      Pass  command  to a shell.  X can be any character not occurring
	      in command.

       copy "filename"
	      Include filename at this point in the file.

       copy ["filename"] thru X body X [until "word"]
       copy ["filename"] thru macro [until "word"]
	      This construct does body once for each  line  of	filename;  the
	      line  is split into blank-delimited words, and occurrences of $i
	      in body, for i between 1 and 9, are replaced by the i-th word of
	      the  line.   If  filename is not given, lines are taken from the
	      current input up to .PE.	If an until clause is specified, lines
	      will  be read only until a line the first word of which is word;
	      that line will then be discarded.	 X can be  any	character  not
	      occurring in body.  For example,

		     .PS
		     copy thru % circle at ($1,$2) % until "END"
		     1 2
		     3 4
		     5 6
		     END
		     box
		     .PE

	      is equivalent to

		     .PS
		     circle at (1,2)
		     circle at (3,4)
		     circle at (5,6)
		     box
		     .PE

	      The  commands  to	 be  performed for each line can also be taken
	      from a macro defined earlier by giving the name of the macro  as
	      the argument to thru.

       reset
       reset variable1, variable2 ...
	      Reset  pre-defined  variables  variable1, variable2 ... to their
	      default values.  If no  arguments	 are  given,  reset  all  pre-
	      defined  variables to their default values.  Note that assigning
	      a value to scale also causes all pre-defined variables that con‐
	      trol  dimensions	to  be reset to their default values times the
	      new value of scale.

       plot expr ["text"]
	      This is a text object which is constructed by using  text	 as  a
	      format  string for sprintf with an argument of expr.  If text is
	      omitted a format string of "%g"  is  used.   Attributes  can  be
	      specified	 in the same way as for a normal text object.  Be very
	      careful that you specify an appropriate format string; pic  does
	      only very limited checking of the string.	 This is deprecated in
	      favour of sprintf.

       variable:=expr
	      This is similar to = except variable must	 already  be  defined,
	      and  the value of variable will be changed only in the innermost
	      block in which it is defined.  (By contrast, = defines the vari‐
	      able  in	the  current block if it is not already defined there,
	      and then changes the value in the current block.)

       Arguments of the form

	      X anything X

       are also allowed to be of the form

	      { anything }

       In this case anything can contain balanced  occurrences	of  {  and  }.
       Strings may contain X or imbalanced occurrences of { and }.

   Expressions
       The syntax for expressions has been significantly extended:

       x ^ y (exponentiation)
       sin(x)
       cos(x)
       atan2(y, x)
       log(x) (base 10)
       exp(x) (base 10, ie 10x)
       sqrt(x)
       int(x)
       rand() (return a random number between 0 and 1)
       rand(x) (return a random number between 1 and x; deprecated)
       srand(x) (set the random number seed)
       max(e1, e2)
       min(e1, e2)
       !e
       e1 && e2
       e1 || e2
       e1 == e2
       e1 != e2
       e1 >= e2
       e1 > e2
       e1 <= e2
       e1 < e2
       "str1" == "str2"
       "str1" != "str2"

       String comparison expressions must be parenthesised in some contexts to
       avoid ambiguity.

   Other Changes
       A bare expression, expr, is acceptable as an attribute; it  is  equiva‐
       lent to dir expr, where dir is the current direction.  For example

	      line 2i

       means draw a line 2 inches long in the current direction.

       The  maximum  width  and height of the picture are taken from the vari‐
       ables maxpswid and maxpsht.  Initially these have values 8.5 and 11.

       Scientific notation is allowed for numbers.  For example
	      x = 5e-2

       Text attributes can be compounded.  For example,
	      "foo" above ljust
       is legal.

       There is no limit to the depth to which blocks can  be  examined.   For
       example,
	      [A: [B: [C: box ]]] with .A.B.C.sw at 1,2
	      circle at last [].A.B.C
       is acceptable.

       Arcs  now have compass points determined by the circle of which the arc
       is a part.

       Circles and arcs can be dotted or dashed.  In TeX mode splines  can  be
       dotted or dashed.

       Boxes can have rounded corners.	The rad attribute specifies the radius
       of the quarter-circles at each corner.  If no rad or diam attribute  is
       given, a radius of boxrad is used.  Initially, boxrad has a value of 0.
       A box with rounded corners can be dotted or dashed.

       The .PS line can have a second argument specifying a maximum height for
       the  picture.   If  the	width  of  zero is specified the width will be
       ignored in computing the scaling factor for the picture.	 Note that GNU
       pic  will always scale a picture by the same amount vertically as hori‐
       zontally.  This is different from the DWB 2.0 pic  which	 may  scale  a
       picture	by a different amount vertically than horizontally if a height
       is specified.

       Each text object has an invisible box associated with it.  The  compass
       points  of  a  text  object  are	 determined by this box.  The implicit
       motion associated with the object is also determined by this box.   The
       dimensions  of this box are taken from the width and height attributes;
       if the width attribute is not supplied then the width will be taken  to
       be  textwid;  if	 the  height attribute is not supplied then the height
       will be taken to be the number of  text	strings	 associated  with  the
       object times textht.  Initially textwid and textht have a value of 0.

       In  places where a quoted text string can be used, an expression of the
       form

	      sprintf("format", arg,...)

       can also be used; this will produce the arguments  formatted  according
       to format, which should be a string as described in printf(3) appropri‐
       ate for the number of arguments supplied, using only the e, f, g	 or  %
       format characters.

       The  thickness  of  the lines used to draw objects is controlled by the
       linethick variable.  This gives the thickness of lines  in  points.   A
       negative	 value	means  use  the default thickness: in TeX output mode,
       this means use a thickness of 8 milliinches; in TeX  output  mode  with
       the  -c	option,	 this  means  use  the line thickness specified by .ps
       lines; in troff output mode, this means use a thickness proportional to
       the pointsize.  A zero value means draw the thinnest possible line sup‐
       ported by the output device.  Initially it has a value of -1.  There is
       also a thick[ness] attribute.  For example,

	      circle thickness 1.5

       would  draw  a circle using a line with a thickness of 1.5 points.  The
       thickness of lines is not affected by the value of the scale  variable,
       nor by the width or height given in the .PS line.

       Boxes  (including boxes with rounded corners), circles and ellipses can
       be filled by giving then an  attribute  of  fill[ed].   This  takes  an
       optional argument of an expression with a value between 0 and 1; 0 will
       fill it with white, 1 with black, values in between with a  proportion‐
       ally  gray  shade.  A value greater than 1 can also be used: this means
       fill with the shade of gray that is currently being used for  text  and
       lines.	Normally  this will be black, but output devices may provide a
       mechanism for changing this.  Without an argument, then	the  value  of
       the  variable fillval will be used.  Initially this has a value of 0.5.
       The invisible attribute does not affect the filling  of	objects.   Any
       text associated with a filled object will be added after the object has
       been filled, so that the text will not be obscured by the filling.

       Arrow heads will be drawn as solid triangles if the variable  arrowhead
       is  non-zero  and  either TeX mode is enabled or the -x option has been
       given.  Initially arrowhead has a value of 1.

       The troff output of pic is device-independent.  The -T option is there‐
       fore  redundant.	  All  numbers	are taken to be in inches; numbers are
       never interpreted to be in troff machine units.

       Objects can have an aligned attribute.  This will only  work  when  the
       postprocessor  is grops.	 Any text associated with an object having the
       aligned attribute will be rotated about the center  of  the  object  so
       that  it	 is  aligned  in the direction from the start point to the end
       point of the object.  Note that this attribute will have no effect  for
       objects whose start and end points are coincident.

       In places where nth is allowed `expr'th is also allowed.	 Note that 'th
       is a single token: no space is allowed between the ' and the  th.   For
       example,

	      for i = 1 to 4 do {
		 line from `i'th box.nw to `i+1'th box.se
	      }

CONVERSION
       To  obtain a stand-alone picture from a pic file, enclose your pic code
       with .PS and .PE requests; roff configuration commands may be added  at
       the beginning of the file, but no roff text.

       It  is  necessary  to feed this file into groff without adding any page
       information, so you must check which .PS and .PE requests are  actually
       called.	For example, the mm macro package adds a page number, which is
       very annoying.  At the moment, calling standard groff without any macro
       package	works.	 Alternatively, you can define your own requests, e.g.
       to do nothing:

	      .de PS
	      ..
	      .de PE
	      ..

       groff itself does not provide direct  conversion	 into  other  graphics
       file  formats.  But there are lots of possibilities if you first trans‐
       form your picture into PostScript® format using the groff option	 -Tps.
       Since  this ps-file lacks BoundingBox information it is not very useful
       by itself, but it may be fed into other	conversion  programs,  usually
       named  ps2other	or  pstoother  or  the like.  Moreover, the PostScript
       interpreter ghostscript (gs) has built-in graphics  conversion  devices
       that are called with the option

	      gs -sDEVICE=<devname>

       Call
	      gs --help

       for a list of the available devices.

       As the Encapsulated PostScript File Format EPS is getting more and more
       important, and the conversion wasn't regarded trivial in the  past  you
       might  be  interested  to  know	that  there is a conversion tool named
       ps2eps which does the right job.	 It  is	 much  better  than  the  tool
       ps2epsi packaged with gs.

       For  bitmapped  graphic	formats, you should use pstopnm; the resulting
       (intermediate) PNM file can be then converted to virtually any graphics
       format using the tools of the netpbm package .

FILES
       /freeware/gnu-tools/share/groff/1.17.2/tmac/pic.tmac
	      Example definitions of the PS and PE macros.

SEE ALSO
       gtroff(1),   groff_out(5),   tex(1),   gs(1),   ps2eps(1),  pstopnm(1),
       ps2epsi(1), pnm(5)

       Tpic: Pic for TeX

       Brian W. Kernighan, PIC — A Graphics  Language  for  Typesetting	 (User
       Manual).	  AT&T	Bell  Laboratories, Computing Science Technical Report
       No. 116	 <URL:http://cm.bell-labs.com/cm/cs/cstr/116.ps.gz>   (revised
       May, 1991).

       ps2eps is available from CTAN mirrors, e.g.
       <ftp://ftp.dante.de/tex-archive/support/ps2eps/>

       W. Richard Stevens - Turning PIC Into HTML
       <http://www.kohala.com/start/troff/pic2html.html>

       W. Richard Stevens - Examples of picMacros
       <http://www.kohala.com/start/troff/pic.examples.ps>

BUGS
       Input characters that are illegal for groff (ie those with ASCII code 0
       or between 013 and 037 octal  or	 between  0200	and  0237  octal)  are
       rejected even in TeX mode.

       The interpretation of fillval is incompatible with the pic in 10th edi‐
       tion Unix, which interprets 0 as black and 1 as white.

       PostScript® is a registered trademark of Adobe Systems Incorporation.

Groff Version 1.17.2		 27 June 2001			       GPIC(1)
[top]

List of man pages available for Ultrix

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net